Anyone having issues with theirs? Last night I'm home with Isiah by myself hubby slept at his mom's so he could drive her to the airport this morning so after bath I make his bottle it signals water is low so I fill it up put it back on the base and now the temp light goes from yellow to green flashing and won't produce any bottles any ideas???
The Baby Brezza Instant Baby Milk Bottle Warmer lets you make warm formula bottles INSTANTLY without waiting for a traditional bottle warmer. Dispenses warm water 24/7 - just add formula, mix & feed in seconds. Customize for your baby with three different temperatures.
See all benefits ›It's better to buy on babybrezza.com
Lowest Prices Guaranteed
Satisfaction Guaranteed
Free Shipping & 45 Day Return
Exclusive 18 Month Warranty
Expert Support 7 Days a week
Dispenses warm water on demand 24/7;
Just add formula & mixEasy dispensing – Just press the lever
Customize with 3 temperatures:
(Body temperature, Warmer than body temperature and Room temperature)Say goodbye to waiting 4+ minutes for a bottle to warm up with a traditional warmer
Awards
Preparing a bottle for your hungry baby just got a lot easier and faster. Baby Brezza’s Instant Warmer dispenses warm water on demand, all the time. No more agonizing waiting for a traditional bottle warmer to heat up the bottle while your baby is screaming their heads off. Just use our baby bottle warmer dispenser and press the lever to dispense warm water, mix in your formula and you’re ready to feed your baby in seconds!
The Instant Warmer ensures the baby warmer is evenly heated and eliminates the risk of serving water that’s too hot. This dispenser offers 3 temperature settings so you can get the warmth you want. It maintains your selected temperature all day and night. You’ll love how much time it will save you!
The revolutionary water warmer for baby bottles works with all bottle brands and sizes, and the tanks hold 50 ounces of water – a day’s worth of formula. See how this quick-working device speeds up the baby bottle warming process, which is a blessing to busy moms and dads everywhere. Order one today.
To prevent mineral scale on the water heater inside your Baby Brezza Formula Pro® Advanced, follow these easy steps:
1. Remove the water tank, empty it and fill it with 20oz/600ml distilled vinegar & 20oz/600ml of purified water.
2. Place the water tank on the base of the machine & place a cup larger than 10oz/300ml under the funnel.
3. Select “10oz/300ml” with the “oz/ml” button, then press the “water only” button to dispense.
4. Empty the cup, place back under the funnel, then press the “water only” button again to dispense another 10oz/300ml.
5. Now unplug the machine, remove the water tank, and empty it. Let the machine sit for 4 hours.
6. Wash, rinse and fill the water tank to the max line with purified water, then place it back on the base.
7. Plug in the machine, place a cup to catch 10oz/300ml water and use the “water only” button to run a 10oz/300ml cycle. Dispose of the water dispensed in the cup and then repeat this step to run the entire tank of purified water through the machine. When the “Low Water” indicator turns on, you’re done rinsing.
8. Refill the water tank with purified water and return to normal use
Long Term Storage Instructions
It is extremely important to clean the machine and remove all formula powder residue before storage.
If you’re going to store your Formula Pro® Advanced for later use, or will not use it for a while, please follow the instructions below:
1. Remove the powder container parts, funnel, funnel cover, drip tray and water tank from the base.
2. Wipe the base with a clean damp cloth and make sure to remove any and all formula residue. Dry the base well.
3. Empty the powder container, wash all powder container parts, dry thoroughly, reassemble, & reinstall on the base.
4. Follow the Monthly Descaling Instructions shown above, steps 1-7 only. Do not remove or refill the water tank after step 7.
5. Now place a cup to catch 10oz/300ml water under the funnel, then press & hold the “water only” button for 5 seconds. Water will dispense continuously until the machine is completely empty, then stop automatically.
6. Unplug the machine, remove the funnel, funnel cover and water tank, dry them both thoroughly and reinstall them on the machine.
7. Your machine is now ready for storage. Pack the machine in its box or enclose it in a bag to keep it dust free.