Beaumont Plus City Bike - Step Through 8 Speed
-
Shimano Altus 8-speed drivetrain with Rapidfire Plus shifter
-
3-piece aluminum crankset and sealed cartridge bottom bracket
-
Dual pivot aluminum caliper brakes
-
Lightweight aluminum components: hubs, pedals, kickstand and crankset
-
Stainless steel spokes
-
Vintage headlight
Go for $130
Incline, decline, and beeline across your city
Get to know your ride
High-Tensile Steel Frame
Step through style for easy mount/dismount
Shimano 7-Speed
Precision shifting you can count on
Revoshift Twist-Grip Shifter
Hands on handlebar shifting
Sturdy Rear Rack
Haul it all
Full-Wrap Fenders
Ride rain or shine
Safety Bell
Chimes for a good time
FeaturesStep Through Frame
A step through frame supports a comfortable upright riding position and lets you easily sling your leg over the top tube.
Full-Wrap Fenders
Ride rain or shine without worrying about getting splashed.
Shimano 7-Speed
Tackle inclines or cruise flats with a versatile drivetrain
Shimano Revoshift Shifters
Easily change gears with palms on the handlebars and eyes on the road.
Handy Rear Rack
Haul your things on the sturdy rear rack or add a wicker basket for extra storage.
Upright Riding Position
Riser handlebars and an ErgoComfort saddle promote a comfortable upright riding position.
Best for pavement
Pavement
Gravel
All terrain
Best for some hills
Flat
Some hills
Hilly
Mountain
" Retrospec's massive line of bikes spans beach cruisers to foldable frames, but the Beaumont takes the cake for being the most versatile and well-designed city model."
" This speed bike is a dashing and well-engineered ride."
" Get this bike if you want a non-nonsense bike to bop around town (and look cool doing it)."
- Specifications
- Sizing
- Financing
- Assembly instructions
Specification
Frameset
- Frame Classic City Step-thru, hand-built high-tensile steel, steel chainguard, double rear dropout eyelets, rear rack braze-ons & decals protected by clear-coat
- Fork Unicrown, threaded, 2x eyelets
Wheels
- Rims Retrospec aluminum double-wall 32H, 20mm apex section, precision machined brake tracks with wear indicator
- Hubs Steel ball-bearing, 32H, bolt-on
- Spokes 14G UCP
- Tires Retrospec 700C x 35 All-Conditions, S/V valves
Accessories:
- Kickstand Center-mount, steel
- Rear Carrier Classic design, steel with "mousetrap-style" spring-clip (40lb load limit)
- Bell Aluminum
- Fenders Classic full-wrap steel
Drivetrain
- Derailleur Shimano Tourney 7S
- Shifter Shimano Revoshift (twist) 7S
- Crank Steel 1-piece 170mm x 44T, w/chainwheel guard
- Chain KMC Z-series 1/2 x 3/32"
- BB Loose-ball retainer
- Freewheel/Cog Shimano Tourney 500, 7S 14-28T
Components
- Headset 1 1/8" (28.6mm) steel, Threaded
- Brakes Aluminum alloy linear side-pull calipers & brake alloy/nylon levers
- Handlebars Steel Riser 620mmwide, 60mm rise, 15° sweep, 25.4 Center
- Grips Retrospec Comfort
- Stem Quill-type, steel/alloy 40mm extension/30⁰ degree rise
- Saddle Retrospec Women's/Men's specific ErgoComfort
- Seatpost Steel 25.4mm x Step-Thru 350mm, Diamond 300mm
- Seatpost Clamp Aluminum alloy
- Pedals High Impact, Reinforced Nylon Resin Platform, 1/2"
- Recommended Weight Limit 250 LBS
Sizing
How to measure my inseam for a bike
Your inseam can help you find the perfect sized bike (measuring it properly is similar to pant inseams but measured a little differently). Here's how they work:
- Stand upright with your feet 6-8" apart.
- Using a tape measure or tailor tape, measure from the bottom of your foot to the top of the inside of your leg.
- Compare your inseam measurement to the standover height of the bike. You should have about an inch of space between your body and the top tube.
Size | Height Range | Standover Height |
42cm | 5' - 5'10" | 19.35" |
Buy Now, Pay Later
Assembly Instructions