Garmin Vivofit
How to soft reset Garmin Vivofit
- Hold button to put the Vivofit in SLEEP mode.
- Press the button 5 times until it shows the firmware version (FW version).
- Hold the button until the Vivofit powers off.
How to hard reset Garmin Vivofit
This will completely reset the device and clear all data.
- Hold button to put the Vivofit in SLEEP mode
- Press the button 5 times very quickly, holding it on the 5th press until it shows the firmware version (FW version) AND CONTINUE TO HOLD until the screen goes blank,
- Release and press the button quickly and HOLD until it restarts.
- The Vivofit will reset and when it restarts, it will be at factory settings.
If the device stops responding, you may need to reset it. This does not erase any of your data. NOTE: Resetting the device resets the move bar.
- Hold the device key for 15 seconds.
- Release the device key.
The device briefly displays a triangle, and then displays the watch face.
- Previous Topic
- Next Topic
- Download PDF
- Print Page
If the device stops responding, you may need to reset it. This does not erase any of your data. NOTE: Resetting the device also resets the move bar. The device resets, and the screen turns on. Resetting the Device
Copyright © Garmin. All rights reserved.GUID-12D38168-B49D-42C5-9995-333ED6398570 v5
You can restore all of the device settings to the factory default values. This deletes all data from your device.
- Hold the device key to view the menu.
- Hold .
- Hold the device key until NV RST appears.
The device resets and the screen turns on.
- Pair your device with your smartphone (Pairing with Your Smartphone).