Where is 9/16 of an inch on a ruler?


Here we will explain and show you where 9/16 inches is on a ruler. More specifically, we will give you step-by-step instructions on how to find, and then illustrate, where 9/16 is located on a ruler.

The ruler is divided up into whole inches: 1 inch, 2 inches, 3 inches, and so on. First, we will determine between which two whole inches 9/16 fits. 9 divided by 16 is 0.5625, which is greater than 0 and less than 1. Therefore, 9/16 is located between 0 inches and 1 inch on the ruler.

If you look closely at a ruler, you will see that there are 15 marks between each inch, dividing each inch into 16 equal parts. Below are the lengths to each mark from any whole inch:

Mark 1: 0.0625
Mark 2: 0.125
Mark 3: 0.1875
Mark 4: 0.25
Mark 5: 0.3125
Mark 6: 0.375
Mark 7: 0.4375
Mark 8: 0.5

Mark 9: 0.5625
Mark 10: 0.625
Mark 11: 0.6875
Mark 12: 0.75
Mark 13: 0.8125
Mark 14: 0.875
Mark 15: 0.9375


Looking at the table above, we can locate where the decimal part of 0.5625 fits. The decimal part of 0.5625 fits exactly on Mark 9.

Now we have all the information we need to show you where on our ruler 9/16 is located. 9/16 is located 0 inches and 1 inch on Mark 9. Our illustration below shows 9/16 inches marked with a red pin.

Where is 9/16 of an inch on a ruler?




Inches on a Ruler
Go here if you want us to find another length in inches on a ruler.

9/17 inches on a ruler
Here is the next length in inches on our list that we have illustrated on a ruler for you.


Copyright  |   Privacy Policy  |   Disclaimer  |   Contact


Here we will explain and show you where 1 9/16 inches is on a ruler. More specifically, we will give you step-by-step instructions on how to find, and then illustrate, where 1 9/16 is located on a ruler.

The ruler is divided up into whole inches: 1 inch, 2 inches, 3 inches, and so on. First, we will determine between which two whole inches 1 9/16 fits. 1 9/16 as a decimal is 1.5625, which is greater than 1 and less than 2. Therefore, 1 9/16 is located between 1 inch and 2 inches on the ruler.

If you look closely at a ruler, you will see that there are 15 marks between each inch, dividing each inch into 16 equal parts. Below are the lengths to each mark from any whole inch:

Mark 1: 0.0625
Mark 2: 0.125
Mark 3: 0.1875
Mark 4: 0.25
Mark 5: 0.3125
Mark 6: 0.375
Mark 7: 0.4375
Mark 8: 0.5

Mark 9: 0.5625
Mark 10: 0.625
Mark 11: 0.6875
Mark 12: 0.75
Mark 13: 0.8125
Mark 14: 0.875
Mark 15: 0.9375


Looking at the table above, we can locate where the decimal part of 1.5625 fits. The decimal part of 1.5625 fits exactly on Mark 9.

Now we have all the information we need to show you where on our ruler 1 9/16 is located. 1 9/16 is located between 1 inch and 2 inches on Mark 9. Our illustration below shows 1 9/16 inches marked with a red pin.

Where is 9/16 of an inch on a ruler?




Inches on a Ruler
Go here if you want us to find another length in inches on a ruler.

1 9/17 inches on a ruler
Here is the next length in inches on our list that we have illustrated on a ruler for you.


Copyright  |   Privacy Policy  |   Disclaimer  |   Contact

How To Use an English Ruler 

Where is 9/16 of an inch on a ruler?

Where is 9/16 of an inch on a ruler?

Where is 9/16 of an inch on a ruler?

Where is 9/16 of an inch on a ruler?

Where is 9/16 of an inch on a ruler?


Terminology
A ruler used to be called a rule, and rulers would be rules. Today, the more commonly found term is ruler. The dictionary defines both the term rule and ruler, so either can be used, and for this document I will only use the term ruler.

 Metric Rulers
Metric rulers are fairly
easy to read. They deal with centimeters and millimeters only. You wont have to worry much about fractions.

 Take a look at the following Metric Ruler.

Where is 9/16 of an inch on a ruler?

The longer lines labled with numbers are centimeters, and the shorter lines are millimeters. Since millimeters are 1/10th of a centimeter, if you measure 7 marks after a centimeter, it is 1.7 centimeters long.

 English Rulers
English rulers, are much more difficult to read. Mostly because they deal with fractions, which are a bit
more difficult to learn.

 Take a look at the following English Rulers.

Where is 9/16 of an inch on a ruler?

A ruler marked in 8ths. Every mark is 1/8th of an inch.

Where is 9/16 of an inch on a ruler?

A ruler marked in 16ths. Every mark is 1/16th of an inch.

The center mark between numbers is 1/2.

The red lines on these rulers are marked at 1/2, and 1.

Where is 9/16 of an inch on a ruler?

The next smallest marks on a ruler are 1/4ths.

 The red marks on these rulers are at 1/4, 1/2, 3/4, and 1. (1/2 is the same as 2/4)

Where is 9/16 of an inch on a ruler?

The next smallest marks on a ruler are 1/8ths.

 The red marks on these rulers are at 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, and 1.

Where is 9/16 of an inch on a ruler?

The next smallest mark, if there are any, are 1/16ths.

 The red marks on this ruler are at 1/16, 1/8, 3/16, 1/4, 5/16, 3/8, 7/16,
1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, and 1.

Where is 9/16 of an inch on a ruler?

When marking down a distance from a ruler, mark the whole inch, followed by a space, then the fraction of an inch.

 For example, 1 1/2, or 2 3/8.

 When entering fractions into the conversion calculators, you have to seperate the whole number and the fraction with a + sign.

 For example, 1+1/2, or 2+3/8.

 This information can be found @ OnlineConversion.com



If you need a printable ruler click       http://www.vendian.org/mncharity/dir3/paper_rulers/

Where is 9/16 of an inch on a ruler?

Where is 9/16 of an inch on a ruler?

How big is 9 16 in inches?

In summary, 9/16 inches is the same as 0.5625 inches and 9/16 inches is also the same as 0.046875 feet.

What is 9 16 measurement?

9:16. A 9:16 aspect ratio is used for tall videos. This aspect ratio became popular when smartphones were created with video capabilities. For example, the optimal measure for an Instagram story is 1080 px by 1920 px, which means its ratio is 9:16.

How big is 1 inch and 9 16?

In summary, 1 9/16 inches is the same as 1.5625 inches and 1 9/16 inches is also the same as 0.130208333 foot.

What comes after 9 16 on a tape measure?

1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, and 1. When marking down a distance from a ruler, mark the whole inch, followed by a space, then the fraction of an inch.