How to find the hypotenuse of a triangle using trigonometry

This section looks at Sin, Cos and Tan within the field of trigonometry.

A right-angled triangle is a triangle in which one of the angles is a right-angle. The hypotenuse of a right angled triangle is the longest side, which is the one opposite the right angle. The adjacent side is the side which is between the angle in question and the right angle. The opposite side is opposite the angle in question.

In any right angled triangle, for any angle:

The sine of the angle = the length of the opposite side
                                   the length of the hypotenuse

The cosine of the angle = the length of the adjacent side
                                      the length of the hypotenuse

The tangent of the angle = the length of the opposite side
                                      the length of the adjacent side

So in shorthand notation: sin = o/h   cos = a/h   tan = o/a

Often remembered by: soh cah toa

Example

Find the length of side x in the diagram below:

The angle is 60 degrees. We are given the hypotenuse and need to find the adjacent side. This formula which connects these three is: cos(angle) = adjacent / hypotenuse therefore, cos60 = x / 13 therefore, x = 13 × cos60 = 6.5

therefore the length of side x is 6.5cm.

This video will explain how the formulas work.

The Graphs of Sin, Cos and Tan - (HIGHER TIER)

The following graphs show the value of sinø, cosø and tanø against ø (ø represents an angle). From the sin graph we can see that sinø = 0 when ø = 0 degrees, 180 degrees and 360 degrees.

Note that the graph of tan has asymptotes (lines which the graph gets close to, but never crosses). These are the red lines (they aren't actually part of the graph).

Also notice that the graphs of sin, cos and tan are periodic. This means that they repeat themselves. Therefore sin(ø) = sin(360 + ø), for example.

Notice also the symmetry of the graphs. For example, cos is symmetrical in the y-axis, which means that cosø = cos(-ø). So, for example, cos(30) = cos(-30).
Also, sin x = sin (180 - x) because of the symmetry of sin in the line ø = 90.

For more information on trigonometry click here

We can find an unknown side in a right-angled triangle when we know:

  • one length, and
  • one angle (apart from the right angle, that is).

Example: Depth to the Seabed

The ship is anchored on the seabed.

We know:

  • the cable length (30 m), and
  • the angle the cable makes with the seabed

So we should be able to find the depth!

But How?

The answer is to use Sine, Cosine or Tangent!

But Which One?

Which one of Sine, Cosine or Tangent to use?

To find out which, first we give names to the sides:

  • Adjacent is adjacent (next to) to the angle,
  • Opposite is opposite the angle,
  • and the longest side is the Hypotenuse.

Now, for the side we already know and the side we are trying to find, we use the first letters of their names and the phrase "SOHCAHTOA" to decide which function:

SOH...

  Sine: sin(θ) = Opposite / Hypotenuse

...CAH...

  Cosine: cos(θ) = Adjacent / Hypotenuse

...TOA

  Tangent: tan(θ) = Opposite / Adjacent

Like this:


Example: Depth to the Seabed (Continued)

Find the names of the two sides we are working on:

  • the side we know is the Hypotenuse
  • the side we want to find is Opposite the angle (check for yourself that "d" is opposite the angle 39°)

Now use the first letters of those two sides (Opposite and Hypotenuse) and the phrase "SOHCAHTOA" which gives us "SOHcahtoa", which tells us we need to use Sine:

Sine: sin(θ) = Opposite / Hypotenuse

Now put in the values we know:

sin(39°) = d / 30

And solve that equation!

But how do we calculate sin(39°) ... ?

Use your calculator. Type in 39 and then use the "sin" key.

That's easy!

sin(39°) = 0.6293...

So now we have:

0.6293... = d / 30

Now we rearrange it a little bit, and solve:

Start with:0.6293... = d / 30

Swap sides:d / 30 = 0.6293...

Multiply both sides by 30:d = 0.6293... x 30

Calculate:d = 18.88 to 2 decimal places

The depth the anchor ring lies beneath the hole is 18.88 m

Step By Step

These are the four steps to follow:

  • Step 1 Find the names of the two sides we are using, one we are trying to find and one we already know, out of Opposite, Adjacent and Hypotenuse.
  • Step 2 Use SOHCAHTOA to decide which one of Sine, Cosine or Tangent to use in this question.
  • Step 3 For Sine write down Opposite/Hypotenuse, for Cosine write down Adjacent/Hypotenuse or for Tangent write down Opposite/Adjacent. One of the values is the unknown length.
  • Step 4 Solve using your calculator and your skills with Algebra.

Examples

Let’s look at a few more examples:

Example: find the height of the plane.

We know the distance to the plane is 1000
And the angle is 60°

What is the plane's height?

Careful! The 60° angle is at the top, so the "h" side is Adjacent to the angle!

  • Step 1 The two sides we are using are Adjacent (h) and Hypotenuse (1000).
  • Step 2 SOHCAHTOA tells us to use Cosine.
  • Step 3 Put our values into the Cosine equation:

    cos 60° = Adjacent / Hypotenuse
    = h / 1000

Start with:cos 60° = h/1000

Swap:h/1000 = cos 60°

Calculate cos 60°:h/1000 = 0.5

Multiply both sides by 1000:h = 0.5 x 1000

 h = 500

The height of the plane = 500 meters

Example: Find the length of the side y:

  • Step 1 The two sides we are using are Opposite (y)
    and Adjacent (7).
  • Step 2 SOHCAHTOA tells us to use Tangent.
  • Step 3 Put our values into the tangent function:

    tan 53° = Opposite/Adjacent 
    = y/7

Start with:tan 53° = y/7

Swap:y/7 = tan 53°

Multiply both sides by 7:y = 7 tan 53°

Calculate:y = 7 x 1.32704...

 y = 9.29 (to 2 decimal places)

Side y = 9.29

Example: Radio Mast

There is a mast that is 70 meters high.

A wire goes to the top of the mast at an angle of 68°.

How long is the wire?

  • Step 1 The two sides we are using are Opposite (70) and Hypotenuse (w).
  • Step 2 SOHCAHTOA tells us to use Sine.
  • Step 3 Write down:

    sin 68° = 70/w

The unknown length is on the bottom (the denominator) of the fraction!

So we need to follow a slightly different approach when solving:

Start with:sin 68° = 70/w

Multiply both sides by w:w × (sin 68°) = 70

Divide both sides by "sin 68°":w = 70 / (sin 68°)

Calculate:w = 70 / 0.9271...

 w = 75.5 m (to 1 place)

The length of the wire = 75.5 m

Copyright © 2017 MathsIsFun.com

Toplist

Latest post

TAGs