You don’t need to be an engineer to know how to fix a blown car speaker or how to make car speakers sound better. Simply follow this guide, and I’m sure you will be able to handle your problems.
Overpowered transmission from the batteries through the speaker is the most common cause of a blown car speaker. It triggers the woofer to be deformed, leading to noise and distorted sound.
However, the damaging process often takes place gradually, which makes you difficult to diagnose whether your car speaker is blown or not until it’s getting serious.
When the problem occurs, instead of buying a new speaker, it’s better to repair the old one. This article will show you how to fix a blown car speaker.
Also, we introduce to you some tips on how to play iPhone in cars and how to make car speakers sound better. Hope you enjoy the post!
How to fix a Blown Speaker from Goodolddaze Channel
How To Fix A Blown Car Speaker
1. Remove the mounting screws by using a ratchet with a seven-millimeter socket or a screwdriver.
2. Open the enclosure.
3. Turn off the power.
4. Unplug all the wires connected to the speaker.
You have two ways:
• Use a knife to stab a point on the old foam surround of the speaker. From that hole, gradually tear the surround by hand. Be careful not to tear the paper cone while doing this.
• Use a knife to stab a point on the old foam surround of the speaker. From that hole, gradually cut the surround out of the speaker by using a scissor. This way is safer and easier!
1. Use a knife to remove the cone of the speaker.
2. Remove the voice coil connected to the speaker. Before doing this, make sure you disconnect the terminal wires.
3. Use the back of your knife or sandpaper to scour the old glue remains.
Use a soft cloth to rub off the dirt on both the central space and edges. You might need to use a compressed air cleaner to blow away all the dust completely.
Replace the old voice coil with a new one. Simply put it back into the position where the old coil is used to be.
1. Place the new cone onto the voice coil. Before doing this, make sure you apply some glue onto the new cone.
2. Wait a few minutes until the glue is dry.
1. Put the new surround back into the position where the old one is used to be. Don’t forget some glue.
2. Wait a few minutes until the glue is dry.
1. Connect all the wires back.
2. Screw all the mounting screws.
1. First, test it at a low volume.
2. Gradually increase the volume. If it works fine, you’ve done!
There are a number of options to connect your iPhone or iPad device to your car stereo and listen to music through the car speaker. The choice depends on the features of the stereo in your vehicle. I suggest three most common ways for you:
Bluetooth Stream
For me, this is the most convenient solution, allowing you to enjoy the music via your car speaker with full of control options from skipping tracks to pausing tracks and adjusting the volume.
Simply enable the Bluetooth connection on your car stereo and your phone. Most cars today support a Bluetooth connection via its stereo, so your car is highly one of them.
FM Transmitter
An FM transmitter is cheap, useful and compatible with any car having an FM stereo. It’s also simple to use. Coming with a variety of models, it’s not difficult to purchase a prominent FM transmitter.
For examples, Nulaxy Wireless In-Car Bluetooth FM Transmitter and VicTsing Bluetooth FM Transmitter are the two most best-selling products on Amazon recently.
AUX Audio Input
Some car stereos include an AUX audio input, either via a 3.5-mm audio input or a USB connector. If it’s a 3.5-mm input, you’ll need to purchase a dirt-cheap Auxiliary Input Lead for Car Stereo. If it’s a USB connector, you simply connect your iPhone via its Lightning cable.
The advantage of this method is that it reinforces the quality of sound because there is no wireless transmission lost like an FM transmission or Bluetooth stream.
The built-in amplifier in your car speaker is good, but it’s not enough if you require an incredibly excellent quality of sound. The trick here is adding a separate amplifier, which will provide more clear and high-fidelity music. If you don’t know how to install an amplifier in your car, check this video.
Add a Subwoofer
The main benefit of a subwoofer is to increase the deepness and bass that most car speakers are missing. It also gives a significant improvement in the range and balance of sound. You can adjust any subwoofer to fit your musical demands. About how to install it, check this video.
Use an Equalizer
App Smartphone users use equalizer apps to enhance the quality of sound as they play music from their device. For cars, you can apply the same method. As the sound from your phone is improved, the music from the speaker of your car will be enhanced too. Some popular apps are EQ-10 (for iOS) and Radsone (both iOS and Android).
Conclusion
You don’t need to be an engineer to know how to fix a blown car speaker or how to make car speakers sound better. Simply follow this guide, and I’m sure you will be able to handle your problems.
For how to play iPhone in cars, you can use the Bluetooth stream in your car or invest in an FM Transmitter. If you have any question or suggestion, please leave it in the comment section below.
Thank you so much for reading!