Show
Description Solid State Electronic Fuel Pumps can be used in conjunction with, or in place of your original pump. The solid state pump will push or pull fuel, from a hidden location under the car, through your original pump; or, put it in line with a power switch and use it as a backup. Includes mounting and installation hardware as illustrated, and instructions. Works on positive or negative ground cars. DetailsInstructions & ResourcesWarrantyThe Longest in the Business
Feedback When my Vitesse first hit the road back in 1997, I tried using a pair of S.U. pumps converted at great cost to electronic switching, but it turned out that they were unsuitable for the Vitesse tank with it's swan neck pipe on top. Apparently the S.U. pump is not self-priming, so they kept getting airlocks and stranded me in some dangerous positions! I then changed them for the Facet Silver Tops, and have had no pumping problems since. One of the S.U. pumps was a new Stag item, and the other was a new Jaguar item, (exactly the same, but the Jaguar one cost considerably less)! I sold one to an MGB owner at the SEM just before I left the UK, and sold the other to a US based Stag owner after I emigrated. L Facet Low-Pressure Electrical Fuel Pumps can be found on all kinds of engines, from military diesel generators to tractors and skid steers to street cars and racing vehicles. These are some of the questions we hear most often. How do you say Facet? "Faw‑set"? "Face‑it"? "Fuh‑seet"? "Fack‑uh‑tet"? "Fake‑teet"? "Fact"? We say FAH-set (rhymes with "fast 'vette" or "fact check"). Facet is an actual English word meaning "one side or face of something many-sided" (as in, a cut gemstone has many facets) or "an aspect that makes up a subject" (as in, this company is present in many different facets of the automotive industry). (And yes, we have heard all of those pronunciations and more.) I have a Facet pump that looks just like one I saw on your site. Is it the same? Not necessarily! In each particular series, Facet offers at least 9 (and as many as 46!) different pumps that all look identical but have very different pressure and flow ratings. The only way to know which pump you have is by looking at the Facet part number stamped on the mounting foot. Click the link for more information. I have an old Bendix pump. Are they still available? Yes, but they are now labeled as Facet. Facet is the same company making the same pumps from the same designs under the same part numbers (you don't need a cross-reference chart). They are even located in the same factory. A not-so-brief history of Facet and Bendix: I need a positive-ground Facet pump. Can you still get them? Facet no longer manufactures positive-ground pumps. All of the current Facet pumps are negative-ground. But installing a negative-ground Facet fuel pump in a positive-ground vehicle is relatively easy. Click the link for full instructions. I only need an electrical pump to prime my mechanical pump. Can I still pull fuel through a Facet pump when it is off? It depends on the specific pump. Some Facet pumps are equipped with a positive shut-off valve (also known as an anti-siphon valve), which prevents fuel from being siphoned through the pump. None of the pumps in the Posi-Flo line have a positive shut-off valve, so any of those would be a safe bet for this type of installation. If you also want to be able to run the car on the electrical pump, then you need to check your chosen pump. Facet fuel pumps without a positive shut-off valve (fuel can be drawn through with the pump off) Facet fuel pumps with a positive shut-off valve (fuel will not flow through with the pump off) Are Facet fuel pumps compatible with diesel or ethanol? Yes. All Facet low-pressure fuel pumps (Cube Style, Posi-FLo, Gold-Flo/cylindrical, and Dura-Lift) are fully compatible with gasoline, diesel, biodiesel, ethanol blends up to and including E85, and commercial fuel additives. How much amperage do Facet pumps draw? The low-pressure Facet fuel pumps draw an average 1.5 Amps. Specifically, the Cube Style average 1.4 Amps, the Posi-Flo average 1.6 Amps, the Gold-Flo (cylindrical) average 1.6 Amps, and the Dura-Lift average 1.4 Amps. Do I need to install a fuse in the electrical feed line? Yes. Facet recommends a 3 Amp fuse. Where can I mount a Facet pump? Can I put it in the engine bay? Electric fuel pumps like these tend to push better than they pull. For this reason, you should mount the pump as close to the gas tank as possible and a low as practical. Each pump has a "dry lift" rating which must not be exceeded or the pump will starve. What about a Dura-Lift pump? The Dura-Lift series feature unusually high dry lift ratings because they are specifically designed for lifting fuel a great distance in fuel transfer applications. They are often used on marine generators and refrigerated semi trailers, where the fuel tank is located 5 to 10 feet below the engine. A Dura-Lift pump can be mounted in the engine bay to replace the mechanical lift pump in a diesel truck, but they are not a good choice as the main fuel pump in most automotive fuel systems. Does it matter how I mount a Facet pump? Can I mount it sideways? Ideally, you should mount the pump with the outlet higher than the inlet to prevent vapor lock. Next best is horizontal, with the inlet and outlet at the same height. Mounting the pump with the inlet above the outlet should be avoided because it can promote vapor lock. How much heat can Facet pumps stand? Facet low-pressure pumps have an operating temperature range of -40° F to 180° F (-40° C to 82° C). Exceeding the maximum recommended temperature will cause the pump to stop working. We have had a few customers report that their overheated pump started working again after it cooled off, but in every case the pump had suffered permanent damage and did not work for very long. This is another reason to mount the pump close to the fuel tank instead of in the engine compartment. Why do Facet pumps list a pressure and a flow rating, but then you give a different flow at a different pressure? There is a relationship between pressure and flow: As flow increases, pressure decreases. The pressure and flow ratings are to be considered the maximum for any given pump, but remember that you can't have both at once. Maximum pressure happens with very little flow, and maximum flow happens with very little pressure. We try to pick a point near the midpoint of the graph to illustrate a "typical" application. I just unpacked my new Facet pump and gas spilled out. Did you sell me a used pump? No. This is not gasoline but a petroleum-based light solvent (which is fully compatible with gasoline). Facet uses this solvent to bench-test every pump prior to shipping, and some of the solvent often remains inside the pump. It will not affect performance or harm anything inside your engine. My new Facet pump seems to run constantly, but the old pump used to slow down or stop. Is the new pump defective? No. All current Facet low-pressure pumps run constantly as long as power is supplied. Older Gold-Flo (cylindrical) pumps were known as "Interruptor" pumps because they would start off pumping very quickly, then slow down as they built pressure. They might even stop completely once they reached their design pressure. The interruptor behavior went away when Facet changed the Gold-Flo series from breaker points to the same solid-state operation as the cube-style pumps (around the late 1990s). The part numbers for solid-state Gold-Flo pumps have an E at the end to indicate "Electronic" operation. During the transition, Gold-Flo pumps with breaker points had part numbers that ended in I (for Interruptor). Note that we still use the original part numbers without a letter at the end, even though all Gold-Flo pumps are now the E (Electronic) version. The filter bowl on my Dura-Lift pump isn't filling all the way. Is it defective? No. The fuel level will normally be at or below the level of the pickup, which is located just about at the halfway point of the bowl. The level of fuel visible in the filter bowl is affected by the difference in pressure between the inside of the filter and the outside of the filter. A partually clogged filter will increase the pressure difference, which will cause a lower fuel level than normal. I just need a basic pump. What does everyone else buy? If everyone bought the same pump, we wouldn't stock over 50 different versions. But the vast majority of carbureted automotive applications can be covered by just a handful of pumps.
Buy Facet Fuel Pumps:Facet Electrical Fuel PumpsFacet 12 volt Cube-Style Fuel PumpsFacet 12 volt Posi-Flo Fuel PumpsFacet 12 volt Gold-Flo Cylindrical Style Fuel PumpsFacet 24 volt Fuel PumpsFacet Dura-Lift Fuel PumpsMore Helful Technical Documents:Technical Documents on Air and Fuel DeliveryTechnical Documents Home PageHow do solid state fuel pumps work?Solid State (cube) Pump
The pumps run constantly and will click even when full pressure has been reached and no fuel is flowing to the carbs. The pumps have a maximum lift of 30cms so must be fitted near the level of the fuel tank.
What is the working principle of fuel pump?In modern cars and motorcycles with fuel injector the fuel pump is usually electric and located inside the fuel tank. The pump creates a higher pressure in the fuel lines, pushing the gasoline to the engine. The higher pressure raises the boiling point of the gasoline.
Do carbureted engines have fuel pumps?Carbureted systems are simple: less parts, less complexity, less maintenance. In fact, our carbureted Cessnas do not need fuel pumps since the fuel tanks are high (in the wings) and push the fuel all the way to the carburetor. One thing carbureted engines do need is carb heat.
|
How does a solid state fuel pump work
Related Posts
Copyright © 2024 ShotOnMac Inc.
