How to get gum off a seatbelt

Download Article

Discovering chewing gum stuck to the seat of your car is very frustrating! Thankfully, there are several ways to remove the gum and all of its sticky residue! Be prepared to try more than one method.

1. 

   1

   Put ice in a plastic bag. Put 3 to 4 pieces of ice in a plastic bag and seal it. If you don’t have ice on hand, use a freezer pack instead.[1]

   • The bag helps contain the water from the melting ice cube.
   • If you are concerned about the water leaking, double bag the ice.

2. 

   2

   Freeze the gum. Set the bag of ice directly on top of the gum. Let the ice sit on the gum for 5 minutes or until the gum becomes stiff and brittle.[2]

   • Ice will freeze, or harden, the gum. When gum is hard and not sticky, it is easier to remove.
   • You can also hold the bag of ice against the gum. Prevent your hand from getting cold by placing a towel between the bag of ice and your palm.

   Advertisement

3. 

   3

   Remove the hardened gum. Use a dull putty knife or blade to separate the frozen gum from the fabric of your car seat. The blade should remove all or most of the gum.[3]

   • Keep the blade flat to avoid poking holes in the fabric.
   • Be patient. It may take awhile to separate the gum from the seat. Go slowly to avoid puncturing the fabric.

Advertisement

1. 

   1

   Remove gum from cloth or vinyl car seats with white vinegar. Soak a small cloth in warm, white vinegar. Rub the saturated cloth on the gum. Allow the vinegar to soak into the gum for a few minutes. The vinegar will loosen the gum, causing it to ball up. Remove the softened, vinegar-soaked ball of gum with your fingers or a pair of tweezers.[4]

   • Use this method to remove chewing gum from cloth or vinyl, but not leather.
   • To quicken the process, warm up the vinegar first before applying it to the gum.

2. 

   2

   Brush and wash away residue. Combine 1 tablespoon liquid dish soap, 1 tablespoon white vinegar, and 2 cups warm water in a medium sized bowl. Mix the solution together until soap suds form. Dip a tooth brush, nail brush, or clean cloth into the solution and gently scrub away the gummy residue. Repeat as needed. Blot the area with a clean, damp cloth to soak up the homemade solution. Allow the spot to air dry or dab it dry with a clean towel.[5]

3. 

   3

   Remove bits of gum with scotch tape. Rip off a piece of tape and adhere it to the gum residue. Pull the tape off, taking the gum residue with it. Repeat as needed.[6]

   • This method is safe to use on leather upholstery.
   • If there is still remaining gum on the car seat after the "Freezing Method," use this method to completely remove all the chewing gum.

4. 

   4

   Clean the area with a commercial degreaser. Remove any remaining gum residue with a commercial degreaser. Spay or squirt the product onto a clean, damp cloth. With the cloth, rub away the gummy residue. Grab a new cloth, dampen it with cold water, and wipe away any traces of gum or commercial degreaser from the seat.[7]

   • Always read the instructions that accompanying the degreaser! Make sure the product is safe to use on your cloth, vinyl, or leather seats before using it.

5. 

   5

   Clean the seat. After removing the gum, clean and or condition the affected area. Use the appropriate product for your cloth or leather car seat.

   • Clean your cloth car seats with an upholstery cleaner. This product will remove any set in stains from the gum.[8]
   • Protect your leather car seats by applying a leather conditioner to the affected area. The conditioner will prevent your seats from cracking.

Advertisement

Add New Question

• Question

  How do I get ink out of a leather seat?

  

  Use hair spray. Try it on an inconspicuous area first. If it doesn't stain, gently rub the spot until it disappears.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

• Use the white of an egg, mayonnaise, or peanut butter instead of white vinegar to loosen the gum.

Thanks for submitting a tip for review!

Advertisement

• Do not scrape the gum while it is still soft. There is the risk of the gum going deeper into the car seat fabric and it will be harder to remove.

Advertisement

About This Article

Article SummaryX

To remove chewing gum from a car seat, put 3 to 4 ice cubes in a plastic baggie and seal it tightly. Next, set the bag directly on top of the gum and let it sit for about 5 minutes until the gum becomes stiff and brittle. Then, use a dull putty knife or razor blade to separate the hardened gum from the fabric of your car seat. Be sure to keep the blade flat as you work to avoid puncturing the car seat fabric! For tips on removing any leftover residue, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 399,386 times.

Did this article help you?

How do you get melted gum off a car?

How do you remove dried gum from metal?

How do you get hard gum out of fabric?