How to get jb weld off skin

I don't find J-B Weld to be as wonderful as some others, but I use is occasionally for non-critical applications where nothing else works except more expensive products or methods.

Unless you're very careful you'll get some of it on your hands (and maybe other areas of skin). I've found the hand cleaner used by mechanics works for this. I use a product named FAST Orange because it's readily available at my nearby auto supply store, but I imagine almost any such hand cleaner will work. If you don't have hand cleaner or it doesn't work, try acetone or lacquer thinner. I clean my hands soon after I get the stuff on them. In my uses I'm through working with it in about 15-20 minutes and I try to remove it within twenty minutes after that. You may be able to wait longer but if you wait 'til it cures it may not come off.

Another J-B Weld tip: The stuff keeps practically forever, but you may not be able to get the caps off the tubes after one use. If you dab a little Vaseline on the threads (I use a Q-Tip) you'll probably have better luck getting the tube open next time you want to use some.

The people saying you can't, or use a belt sander 😂, are surely being silly.

And that's ok, because I'M the idiot that didn't use gloves! Lol

But for the record, isopropyl alcohol and a greenie weenie worked awesome for me.

Granted, that shit is nasty and I won't forget the gloves next time.

Need to learn how to remove JB Weld epoxy from your skin and other materials such as plastic, car paint, and metal like aluminum, then look no further.

We'll be honest we were a little apprehensive to test this one out, but the outcome was great!

Alright guys, heres another "How To Remove," video but this time we answered the request for JB Weld Epoxy.

As always, we like to say get it while it's still tacky to help dissolve the JB Weld and take it off not when it's cured, and as you can see in this video we did just that.

We went a head and used our Grip Clean Heavy Duty Hand Wipes to start and got some pretty good results. Then we got greedy and went in for a second test and used our Grip Clean All Natural Hand Soap Formula to see how that would perform.

Watch the video to see what happens next!

✅ All-natural dirt infused formula

🙌 Will not dry or crack skin

🛠️ Maximum grease absorption power

🇺🇸 Made in the USA

Click a link to check us out at 📲 :

INSTAGRAM

FACEBOOK

TIKTOK

Transcript:

try it on jb weld huh all right that seems completely unsafe let's give it a shot my people we have some jb weld here uh we're gonna pop it open so there we have it we have some two-part jb weld epoxy and i'm gonna squirt it on the table here and well i'm gonna mix it up using my fingers now i do not recommend this stuff it is very dangerous and it will give you a chemical burn on your skin so when you get this stuff on your skin you need to get it off right away now i am not gonna let this stuff fully dry on my hand i'm gonna try to get it off now a normal wipe would probably not pull this off it would kind of smear it like a paper towel now our heavy duty hand wipes dude they took that stuff off no problem i was honestly worried and scared but boom i'm giving that a thumbs up it worked awesome so if you guys are working with this i highly recommend it but i'm going for test number two i also wanted to see if our hand cleaner would take it off i put a little bit more while it was still wet on my fingertips and as you saw i just use our natural soap and boom that also took it off so get it off while it's still curing and you'll have good luck

Home
Frequently Asked Questions
How do you get J-B Weld off your hands?

Acetone or acetone-based products will remove most J-B Weld from hands and most surfaces.

How do you get J-B Weld epoxy off skin?

How to remove epoxy resin from skin

Water and soap. Most of the time, simply washing your hands in warm soapy water is enough to remove epoxy. ...
Vinegar. If soapy water didn't do the trick, try soaking a cloth or cotton ball in vinegar and gently rub it on the affected area. ...
Citrus-based waterless hand cleaner.

What to do if you get J-B Weld on your skin?

Removing J-B Weld From Skin

I use a product named FAST Orange because it's readily available at my nearby auto supply store, but I imagine almost any such hand cleaner will work. If you don't have hand cleaner or it doesn't work, try acetone or lacquer thinner. I clean my hands soon after I get the stuff on them.

Is J-B Weld safe on skin?

SKIN: Contact will probably cause no more than irritation. Wash off in flowing water or shower. Wash clothing before reuse. INGESTION: Low in toxicity.

Does alcohol dissolve J-B Weld?

Many are soluble in denatured alcohol. There are a few that are impervious to denatured alcohol, but JB Weld ain't one of them.

Cleaning JB Weld Off Your Fingers

Is J-B Weld permanent?

J-B Weld is the Original ColdWeld two-part epoxy, and it provides strong, lasting repairs to surfaces such as metal, wood, plastic, tiles, concrete, fibreglass and PVC. It is mixed at a ratio of 1:1, and forms a permanent bond that can be shaped, tapped, filed, sanded, and drilled after curing.

How long does J-B Weld last once applied?

How long will the tubes of J-B Weld last once open? The tubes of J-B Weld will last up to 25 years once open, provided the caps are secured tightly between uses, although we are sure you will have used them much, much sooner than this.

How long does J-B Weld take to harden?

At room temperature, J-B Weld™ sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld™ has a tensile strength of 5020 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.

What is J-B Weld made out of?

The resin in J-B Weld epoxy is bisphenol-A (yep, that BPA) combined with garlicky-smelling epichlorohydrin. Chemically, the molecule is a chain with little carbon-and-oxygen triangles, called epoxide rings, on the ends.

Will J-B Weld bond to itself?

JB Weld will adhere to itself, but it's not recommended.

The adhesive is designed to bond two different surfaces together, so using it on just one surface can result in a weaker repair.

How toxic is J-B Weld?

No. When fully cured, J-B Weld is non-toxic. However, we do not recommend consuming the product.

Will J-B Weld melt with heat?

J-B Weld can withstand a constant temperature of 500 °F (260 °C), and the maximum temperature threshold is approximately 600 °F (316 °C) for 10 minutes. J-B Weld can also be used inside a microwave oven, exposed to microwave radiation instead of infrared radiation (heat).

Is original J-B Weld waterproof?

J-B Weld Original is waterproof, petroleum, chemical and acid resistant once fully cured. Surface Applications: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.

What happens if I get epoxy on my hands?

In addition to a sticky mess, some users may find their skin becomes irritated if it comes into direct, prolonged contact with epoxy resin. Irritation may include redness and itchiness and should subside after the resin is removed. For this reason, if you accidentally get resin on your skin, remove it immediately.

How do you get dried resin off your hands?

Rubbing Vinegar

Vinegar like water and soap dissolves not only the adhesive bond between resin and your skin but the resin itself! Simply soak the corner of the rag in some vinegar and scrub the sticky coating away.

How do you get rid of epoxy rash?

Treatment of contact dermatitis due to epoxy resin exposure

Washing the area immediately with soap and water should treat accidental exposure from glue or paints. Sometimes, solvents (acetone, alcohol, or methyl-ethyl ketone) can be used to reduce the exposure.

Is J-B Weld toxic to breathe?

Inhalation No known significant effects or critical hazards. Skin contact Causes skin irritation. May cause an allergic skin reaction. Ingestion Irritating to mouth, throat and stomach.

Is J-B Weld stronger than epoxy?

Weld was accualy better than epoxy. Not price wise, but its quality. JB Weld actually is stronger, but not enough to make it worth it. It's very hard to get smooth.

What will dissolve J-B Weld?

Acetone or acetone-based products will remove most J-B Weld from hands and most surfaces. In some instances, a light to moderate abrasive might be required.

Is J-B Weld as good as welding?

Than J-B Weld Epoxies. J-B Weld, known as "The Original Cold Weld," was developed as an alternative to traditional torch welding. It's designed to be extremely effective in even the harshest environments. Because it's a two-component (or 2k) epoxy system, it uses reactive chemistry to create the strongest bond possible ...

Can you drill and tap J-B Weld?

I have done some really interesting repairs with JB Weld, including filling and tapping for threads in low torque applications. Check out their website, it too says you can drill and tap into the fully cured product.

Can J-B Weld be painted?

As mentioned above, JB Weld will adhere to paint just fine, but it will only adhere as well as the paint to the surface.

Can J-B Weld be applied in layers?

Answer: JB Weld can be applied in layers. Just clean the surface thoroughly, apply the JB weld, and wait at least 8 hours to re-apply. When applying additional layers, it's important to wait to apply until the first application is completely cured.

Is J

Hazard pictograms Signal word Warning! Hazard statements Causes skin and eye irritation. May cause an allergic skin reaction. hands thoroughly after handling.

How do you get super Weld off your skin?

Superglue can bind the skin to paper, skin, or any other surface..

Soaking in warm, soapy water. ... .

Peeling apart stuck skin. ... .

Nail polish remover or acetone. ... .

Butter and oils. ... .

Pumice stone..

Is J

When fully cured, J-B Weld is non-toxic. However, we do not recommend consuming the product.

How long does J

A full cure is reached in 15-24 hours. J-B Weld™ has a tensile strength of 5020 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550ºF when fully cured.