How to remove links from a watch without pins

Download Article

Table of Contents Show

Things You Should Know
Things You'll Need
About This Article
Did this article help you?
How do you remove links from a watch without a kit?
Can you remove watch links without arrows?
Can you take links out of a watch yourself?

Download Article

When you find the perfect watch, it's important that it fits you perfectly. Sometimes, it will be necessary to remove links from the watch band in order to get an exact fit. Read the following article to learn how to remove watch band links in order to tailor any watch to the specifications of your wrist.

Things You Should Know

For links with round or flat pins, just push out the connecting pins. For links with screwed pins, unscrew each pin with a screwdriver.
Remove stretch band links by bending the top edge flaps of the bracelet, opening the bottom edge flaps, and removing the links.
For snap-type links, use a pin pusher to remove the connecting pin, then gently disassemble the links.

1
Measure the watch band. Before you set about removing any watch links, it is necessary to measure your watch band so you know exactly how many links you will need to remove. To do this:
- Position the watch on your wrist exactly the way you intend to wear it.[1] When you are satisfied with the way it is positioned, turn your wrist over so that the watch band clasp side is facing up.
- With the watch band on your wrist, gather the slack in the band and hold the links together to simulate them being removed. Stop gathering the links up when the watch band fits your wrist just the way you like.
- Look where the links are gathered close together at your wrist – be aware that because of the design of the watch band they may not touch. The loose hanging links will tell you the number of links you should remove first.
- If you can't accurately judge the number of links to remove, remove one less than you expect - it is always easier to remove another link than add one back in.
- Be aware that it is always better to remove an even number of watch links.[2] This way, you can remove the same number of links from each side and ensure that the clasp is still located in the center of the watch strap.[3]
2
Gather your tools. In order to remove watch links properly, you will need certain tools. These may include:[4]
- A thin, pointy object like a spring-bar removal tool or pin pusher.
- A long-nosed pliers.
- A small hammer.
- A screwdriver.
- A parts tray.
Advertisement
3
Prepare your work area. Make sure that your work area is free from clutter. It is probably a good idea to put down a sheet or some other covering on your work surface and possibly the floor. This is to make sure that any small pieces won't get lost.[3]

1
Separate the bracelet. With some metal watch straps, it is necessary to separate the bracelet before you can remove any links. To do this:
- Remove the spring bar from the watch strap clasp. To identify which spring bar it is, hold the clasp in your left hand, and it will be the one on the left side.[3]
- Use the spring bar removal tool or pin pusher to compress the spring bar and lever it out of the clasp.
- Be careful that it doesn't spring across the room, because this is the only one you have!
2
Choose which link you are going to remove. Use the pin pusher or spring bar removal tool to push the pin that secures that particular link, following the direction of the printed arrows on the underside of the metal link.[3]
- You should be able to push the pin 2 or 3mm and then pull it out from the other side using your pair of pliers or by hand.
- Place the pin in your parts tray, you will need it to put the bracelet back together again.
3
Watch out for a small metal ferrule. Some watch bands contain small metal ferrules in the middle of joining links that will be released when you take out a pin. It may fall onto the floor or work station, so keep an eye out for it. You will need it later.[3]
4
Remove the link's second pin. Repeat the pin removal process on the link's other pin. When you have finished, you should have two pins and possibly two ferrules ready to use later.
5
Remove the next link. If you need to, remove another link on the other side of the clasp, using the same process. When you have removed as many links as you need to, you are ready to join the bracelet back together.
6
Reassemble the watch band. Once the required links have been removed the pin will need to replaced into the band to complete it again. To do this replace the pin in the opposite direction to the arrows.
- If your watch band has ferrules, place the ferrule in the middle of the link that you are joining up, and when you push the pin back into the hole, make sure to engage the ferrule.
- If you need to, you can gently tap the pin back into place using your small hammer.
7
Reconnect the clasp. To reconnect the clasp, you need to do the reverse of the disconnecting process. Ensure that the clasp is the right way round and replace the spring bars.
8
Try your watch on. Your watch should now fit, if you have removed the correct number of links. If it is still too big, you can always remove another link.
- If it is a little loose or a little tight, it may be possible to further adjust the bracelet by inserting the clasp's spring bars into an alternative set of holes to adjust the size.
- Make sure to keep any extra links and spare pins or ferrules safe, you may need to use them again in the future.

1
Identify the link you wish to remove. Turn the watch on its side, find the link you wish to remove and locate the screw holding it in place.
2
Remove the screw. Use a 1mm screwdriver to remove the required screw. You can do this by applying light pressure and turning the screwdriver in a counterclockwise motion.[5]
- Continue to turn in a counterclockwise motion until the screw becomes loose.
- Use a pair of tweezers or pliers to grab the screw before it falls. Make sure to keep it somewhere safe, as you will need it to reassemble the watch.
- Ensure that you do this over a table or tray to make sure you don't lose screws should they fall during the process.
3
Remove the link. Once the screw has been removed, your chosen link can easily be separated from the watch band. Repeat this process for each link that you need to remove.
4
Reassemble the watch band.[6] Once you have removed the necessary number of links, you can reassemble your watch band by simply reconnecting the links using the removed screw and a screwdriver.

1
Measure the band. You can do this by attaching one end of the watch strap to its case, then wrapping the strap around your wrist. Count how many of the links are overlapping and add one to this number. The number you come with is the number of links that will need to be removed. With this kind of watch band, you can easily remove links from any part of the band.[7]
2
Bend down the top edge flaps. Place the watch face down on your work surface and bend down the top edge flaps of the section you intend to remove.
3
Open the bottom edge flaps. Flip the watch over and snap open the bottom edge flaps. These are located directly to the left of the top flaps you opened already.
4
Remove the links. Take the link out by sliding the section you wish to remove sideways. This will automatically disengage the staples which hold the links together.
5
Put the bracelet back together. To do this, you will need to engage the staples on both sides of the strap at the same time, before snapping all of the flaps back into place.

1
Remove the pin. Using a pin pusher, remove the pin from the link you wish to remove. Make sure you follow the direction of the arrow marked on the underside of the link.
2
Gently apply pressure. Hold the band firmly, with one hand on either of the link whose pin you just removed.[8] Gently apply an upward pressure on the side of the link which is closest to the case. At the same time, apply a gentle downwards pressure on the side nearest the clasp. You should be able to feel the mechanism disengaging.
3
Release the mechanism. Keep applying gentle pressure as you gently "rock" the band to complete the mechanism's release.
4
Dissemble the links. When the mechanism has been released, you can take the links apart by moving the clasp side of the strap towards the case.
5
Gently remove the necessary links. Once the links have been disengaged, you will be able to pull the links apart. Try to do this as gently as possible. Repeat for as many links as necessary.
6
Reassemble the watch band. To reassemble the watch, simply follow the sames steps as above, but in reverse.

Add New Question

Question
How tight is a metal watch band supposed to be?

This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor
Staff Answer
The watch should be snug enough so it doesn’t slide around a lot (the rule of thumb is that it shouldn’t slide down more than 2 in (5 cm) when you let your arm hang down), but not so tight that it feels uncomfortable or leaves imprints in your wrist.
Question
What do I do if the links don’t have arrows?

This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

wikiHow Staff Editor
Staff Answer
If none of the links have arrows, push the pins through from the side where you can’t see a seam in the pin. If some links have arrows and others don’t, you won’t be able to remove the links without arrows.
Question
How do I remove pins from a watch strap?

Use a very strong and thin needle. There's a small hole on the other end of the pin, so insert the needle and just push the pin out.

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

After sizing, have fewer links on the 6 o'clock side of the bracelet[9] (the links under the 6). In general, this makes the deployment clasp more balanced when wearing.
As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!
If you're having trouble seeing when you remove watch links, use a mounted magnifying glass to enhance the pins, links, and other small watch parts.

As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!

Thanks for submitting a tip for review!

In order to avoid scratching your watch band, be careful, take your time and avoid brute force!

As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!
Make sure to accurately measure your wrist with a flexible tape measure before you remove links in a watch. If you remove too many, you'll have to go through the hassle of reinstalling a link.
As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!

Things You'll Need

Spring bar removing tool, or pin pusher
1mm screwdriver
Needle nose pliers (smooth jawed)
A small hammer
A parts tray
Flexible tape measure
Magnifying glass (optional)

About This Article

Article SummaryX

If you want to remove the links from a watch band and the links use round or flat pins, you’ll need a spring bar tool or a pin pusher to remove the pins. Use your tool to carefully push back the spring bar from the watch strap clasp, then push the pins so they slide out from the link you are going to remove. Once each pin is sticking out of the watch by 2 or 3 mm, grasp it with your fingers or a pair of pliers and pull it the rest of the way out. Rejoin the remaining links to the watch clasp by re-inserting the pins you previously removed. For tips on removing links from a stretch band, keep reading!

Did this summary help you?

Thanks to all authors for creating a page that has been read 1,658,489 times.

Did this article help you?

How do you remove links from a watch without a kit?

Place your watch into the holder or foam piece so that you can see the top of the pin. Use the pushpin tool and the hammer to gently tap the pin until it emerges from the other side. Use your fingers or a small set of pliers to remove the pin gently. Repeat until you've removed all your planned links.

Can you remove watch links without arrows?

If none of the links have arrows, push the pins through from the side where you can't see a seam in the pin. If some links have arrows and others don't, you won't be able to remove the links without arrows.

Can you take links out of a watch yourself?

Method 1: By using a pin pusher Place the watch on the table with the push pins facing up. Insert the pin pusher into the hole and push the pin firmly. Once you've pushed the pin enough, it will pop out. Use pliers to remove it together with the link.