Nissan rogue security indicator light car wont start

The Security Indicator Light illuminates to indicate that the security system is either working properly or to let you know that there is a fault in the system.

If the Security Indicator Light is flashing with the key out of the ignition lock and accessory position, this is a normal sign that the alarm and the immobilizer system is active.

While starting the car or key in the "run" position, the security lamp should illuminate briefly then go out. This a “bulb check” and is also normal.

If the Security Indicator Light is on steady with the key in the "run" position, and the vehicle won’t start, there could be a fault with the system. In this case, the first thing to try is a different key to see if this starts the vehicle. If it starts, the key is faulty or the system has a problem with that key. If you are still getting a no-start with the light on steady, the system is at fault and will need to be inspected.

Q: My anti theft system is activated and my car won't start. I didn't know there was even an alarm on the car. I've tried everything

I've tried everything from shutting everything and locking the doors and opening with the key. Undoing the battery...nothing I don't know what to do. The car with a lock will blink but will stop blinking and stay on.. I can't turn my key all the way back with out releasing it under the steering wheel... I'm so frustrated and I don't have enough money to take it to a dealership

My car has 148000 miles.
My car has an automatic transmission.

Ronny Bijj

Automotive Mechanic

35 years of experience

Your anti-theft system (pass-lock) may have a fault or it may be the key itself. The keys have a chip embedded in them. When inserted into the ignition, the alarm system looks for codes from the key. Try another key if you have one. If it starts, then the first key is bad and has to be replaced. If it does not start with the second key or you do not have one, you may be able to take the key itself to the dealer to see if it is actually transmitting properly. If you have 2 keys and it does not start, try this procedure. The Passlock system has two basic relearn procedures—a ten-minute procedure and a thirty-minute procedure. Which one you use depends on the system and what components have been replaced. The ten-minute procedure involves trying to start the engine. If nothing happens or the engine starts and dies, the security light will be flashing. Leave the key in the On position and wait ten minutes. The flashing light should go off or illuminate without flashing. When it does, turn the ignition off, wait twenty seconds, and then try to start the engine. If it starts and runs, everything is okay. If you get the same result as previously—nothing happens or the engine starts and dies with the security light flashing—wait ten more minutes. You will now begin the thirty-minute relearn procedure, which is just the ten-minute procedure repeated three times. After turning the ignition off for the third time and waiting for twenty seconds, the engine should start and run. If it doesn’t, there may still be something wrong with the system. After the learn procedure is completed and the engine is running, the security light may stay on steady for a few minutes and then go off—this is normal. Depending on the system, replacement of key components will necessitate that a relearn procedure be completed. These include the ignition lock cylinder, Powertrain Control Module (PCM), Body Control Module (BCM), or Instrument Panel Cluster (IPC). If this relearn procedure does not work, the dealership service department may be your only choice.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Engine’s knocking and burning oil

In order for you to get your engine replaced as smoothly as possible, have it done by a qualified mechanic. The Ford dealer would be a good option if your vehicle is under warranty because the repair would likely be...

Key not turning the ignition cylinder.

Hi. A test that can be administered would be if you have a spare key, try to turn on the car with that key. If it turns on, then that would indicate you have a bad key and you should...

Air Suspension light is on

With the information provided for your Lincoln Town Car, there can be a few things happening with your suspension. One or more of the components that make up the air ride suspension system may have been damaged due to the...

Automatic position in dualogic doesn't work properly

Hello! I'll be happy to help. A common component on your particular vehicle that fails is the gearbox communication unit. When they fail it will cause the transmission to shift into neutral without command. Fiat is assessing this problem and...

Door hinges lubricated properly

Hello. I would suggest that you try using white lithium grease. This is the best way to lubricate door hinges, but it may leave a white film on the hinges. Although this may be a bit unappealing, it may be...

how long does it take to replace the fuel pump

The labor to replace the in tank fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement) and the inline fuel filter that should be replaced (https://www.yourmechanic.com/services/fuel-filter-replacement) with the fuel pump will take 4 to 5 hours labor.

Slow coolant loss

Put a clean sheet of paper or cardboard under the car when you park it at the end of your day and check it the next morning for spots. You may or may not see something helpful. If not, sometimes...

My tail or Tag lights aren't working

Hi Cristina. The rear lights are typically powered by an electrical relay, that supplies power to individual lights as input is received from the accessory module. For example, when you turn on the headlights, a signal from the module sends...

A Buyer’s Guide to the 2012 Cadillac CTS

The The 2012 Cadillac CTS comes with high tech features and a large amount of standard equipment when compared to its Japanese and European counterparts. The CTS is available in wagon, coupe, and sedan models to fit the needs of...

The Best Used Cars to Buy If You’re Over Six Feet Tall

While While shorter than average drivers can have a tough time finding the right car, it’s equally hard for taller drivers, perhaps more so. If you’re feeling squished, or have to hunch over the wheel to drive, then you’re not...


What does the security indicator light mean in a Nissan Rogue?

A key with a car outline in your Nissan's instrument cluster is a Security Indicator Light. This light's purpose is to assure you that the security systems equipped on the vehicle are operational. It should blink any time the ignition is placed in the OFF, LOCK, or AUTO ACC positions.

What does it mean when the security indicator light comes on?

The Security Indicator Light illuminates to indicate that the security system is either working properly or to let you know that there is a fault in the system.

How do I turn off the security light on my Nissan Rogue?

NISSAN Vehicle Immobilizer System.
Leave the ignition switch in the ON position for approximately 5 seconds..
Turn the ignition switch to the OFF or LOCK position and wait approximately 10 seconds..
Repeat step 1 and 2 again..

Will my car turn on if I have a security light on?

Just like your check engine light and other dashboard indicators, the security light will illuminate briefly when you turn your car on.