Show
How do I get my TCL TV out of standby mode? How To Turn Off The Standby Light
How do I get my TV off standby mode? Press the power button once. If the TV does not turn on, observe the LED indicator, usually located on the TV’s lower front panel. If the LED indicator turned off after you pressed the power button once, it is in standby mode. Press the power button once again to exit standby and turn on the TV. How do you fix a TCL TV that wont turn on? If your TCL TV won’t turn on, make sure all cords are connected properly. Then unplug your TV and press and hold the power button for 2 minutes. Plug the TV back in. If that doesn’t work, press and hold the reset button located on the back of the TV. How do you force reset a TCL Smart TV? If that happens, you can force the TV to reset by following the steps below:
A simple TV with sufficient smart features and amazing picture quality, for a much affordable price. This is the aptest description for TCL Roku TV. They have the most sophisticated smart technology and are keen on innovating their brand. Soon enough, Roku smart TVs, combined with TCL, will tower the worldwide smart TV production. This article brings out a common issue most TCL TV users face; TCL Roku TV restart loop. Occasionally, the TV enters into a restart loop and keeps repeating the process. Today, we will discuss how to fix the TCL Roku TV restart loop (stuck on startup). So keep reading!
So, it doesn’t happen all the time, but occasionally the TV repeats the restart action after you try to turn it on. This is a major issue and many reasons can cause this malfunction. The causes range from poor connectivity to some internal technical issues. They are sometimes simple to solve while it is advised to call an expert for help in case of the latter. If you face this issue as well, you have nothing to worry about. Just follow our step-by-step instructions to solve them.
You might have already tried this method if you have faced similar issues in the past. If not, here are the steps.
Most of the time, restarting your TV solves any issues related to power interruptions or frozen screens. And all those times, the issue is due to overload of the TV data. An unnecessary cache builds up, causing lag in the TV functions. So it is advisable to perform a restart often. Now, the issue may not necessarily disappear after this method. Move on to the next steps to fix the TCL Roku TV restart loop.
Usually, a glitch is associated with a single application that you might have installed in your TCL smart TV. So in this method, you will have to identify if there is such an application, which causes the restart loop when you open or run it. Now, it could be any application that you may have recently installed. The first step you should do is look for any pending updates for that application. If there are no updates undone then ‘Uninstall the application.’ Follow the steps below to proceed.
Firmware is, basically, the main integral component of your TV that controls and provides the necessary instructions for the TV to function. So you should never neglect any updates that come up for your firmware. Read on to know how to update your firmware. Here are the steps to check whether there are any pending updates.
Your TV will proceed with the update and restart automatically. Pending firmware updates are the root cause for several malfunctions in TCL TVs, so try to turn on ‘Auto-update’ for firmware. This will help to update your firmware as and when required. Image source: TCL Roku TV restart loop
Let us get to the final resort. Here, we have explained step-wise how to perform a factory reset for TCL TV. This step will have the following outcomes.
Thus, you will only need to consider this method if the previous methods didn’t work for you. If you are ready to go on with the reset, read on.
This will reset your TV to how it was before you bought it. You are required to repeat the setup and other settings as per your choice. However, it will resolve the issue of your TCL Roku TV restart loop. SEE ALSO : How to fix TCL TV with no picture but sound? How to adjust brightness in TCL TV? Fix TCL Roku TV stuck on red screen. Frequently Asked QuestionsQ. Why is my TV stuck on standby mode?There is no reason to worry if you notice that the LED light, just below your TCL TV screen is on but you turned your TV off. This light indicates that your TV is still plugged into the power outlet and is ready to be powered on any time you like. Unplugging your TV from the power outlet will put out this light. Sometimes, the TV might not change from the standby position. This could be due to many reasons. The mainboard might have some damage or there is a glitch in the switch mode transistor. Either way, it is advisable to get help from an expert. Q. How do I get my TCL TV out of standby mode?The standby mode puts the TV to sleep, like a computer, and allows you to get back to it anytime you like unless it is unplugged from the power outlet. So the LED light below the screen stays on. But, it is inconvenient for you to plug in and out as and when required. You might as well prefer it to be plugged in most of the time. At the same time, you would want the light to disappear. Here are steps to bring change to this feature of your TV.
Based on your selection the screen will remain on standby mode when there is no activity on your TV or if you don’t provide any input via your remote. Conclusion This article explains some simple methods to fix the TCL Roku TV restart loop. The step-by-step guide will help you carry out effective troubleshooting of the issue. Hope this helps. Dilha is a writer who loves composing poems and going into deep research on all kinds of tech stuff that they don’t
teach in school. How do I get my TCL TV out of standby mode?Press on the TCL Android TV remote control, select System and then press OK. Press▲/▼ to select and highlight Advanced settings then press OK. Press OK on LED indicator: You can set the LED indicator to be flashing, off, or on when the TV is in standby mode. Press ▲/▼ to select your option, and then press OK.
How do I get my TV out of standby mode?Press the power button once. If the TV does not turn on, observe the LED indicator, usually located on the TV's lower front panel. If the LED indicator turned off after you pressed the power button once, it is in standby mode. Press the power button once again to exit standby and turn on the TV.
How do I force restart my TCL TV?To restart your TV, follow the step-by-step instructions below: Press the Settings button on your remote control. Select More Settings > Device Preferences > About > Restart. Select Restart to confirm.
|