Polymerase chain reaction (PCR) is a common molecular biology technique that enables researchers to make multiple copies of a specific region of DNA. PCR is efficient, rapid and can amplify DNA or RNA sequences from various sources. Once the DNA has been sufficiently amplified, the resulting product can be sequenced, analyzed by gel electrophoresis, or cloned into a plasmid for experimental purposes. Show
How does PCR work? What are the steps of PCR?A simple PCR reaction consists of target DNA, a set of synthetic oligonucleotide primers that flank the target DNA sequence, a thermostable DNA polymerase (usually Taq polymerase), and nucleotides. The three steps to each amplification cycle include denaturation, annealing and extension.
What are PCR primers?Primers are single strands of nucleic acids (synthetic oligonucleotides) that are necessary to initiate the PCR. These single strands of DNA or RNA are specific and complementary to the target DNA/RNA sequence portion. During the cooling (annealing) phase of PCR, the primer binds to the target and initiates copying of the target DNA/RNA sequence. Primers are used in pairs, known as forward and reverse primers. We offer custom oligos in multiple formats. Primer sequences must be chosen to target a unique region of DNA, avoiding the possibility of hybridization to a similar sequence. When designing primers, the pairs should have similar melting temperatures because the annealing step occurs for both strands simultaneously. Furthermore, a primer with a Tm (melting temperature) too much higher than the reaction's annealing temperature could hybridize and extend at an undesired DNA sequence. A Tm much lower than the annealing temperature could result in failure to anneal. How many copies of DNA does PCR generate?Because the strands synthesized in one PCR cycle serve as a template in the next cycle, a million-fold increase in the amount of DNA is achieved in just 20 cycles. These cycles can be performed automatically using a thermal cycler instrument.1,2,3 Popular PCR ProductsRoutine PCR is used to produce an amplified amount of DNA for downstream applications, including clone length verification. Our products offer a variety of options to perform routine PCR. Our ReadyMix™ PCR reaction mixes and REDTaq® dye options provide an added convenience for your amplification reaction.
Taq DNA PolymerasesTaq DNA polymerase is a specialized thermostable enzyme isolated from Thermus aquaticus, a thermophillic bacterium. Taq is the most commonly used DNA polymerase for PCR and is now expressed recombinantly in E. coli. The enzyme is capable of 5′ → 3′ polymerase and exonuclease activity; SDS-PAGE examination finds no detectable contamination associated with endonucleases or exonucleases. If you're seeing this message, it means we're having trouble loading external resources on our website. If you're behind a web filter, please make sure that the domains *.kastatic.org and *.kasandbox.org are unblocked. The wide range of applications of PCR has led to an ever-growing list of variants of the technique. We will focus on the conventional PCR which is the most basic type of PCR reaction and this question: what are the three basic steps of conventional PCR.Try Conventional PCR in Praxilabs Virtual Labs
Table of Contents
About PCRThis technology is developed by Kary Mullis. In 1993, Mullis was awarded the Nobel Prize in Chemistry along with Michael Smith for his work on PCR. In 1989, Science magazine selected PCR as the “major scientific development” and Taq polymerase, the enzyme essential to PCR’s success, as “molecule of the year.” The advent of PCR meant that insufficiencies in the quantity of DNA were no longer a limitation in molecular biology research or diagnostic procedures. It is indeed difficult to find publications in the biological sciences that do not describe the application of PCR in some or other way. What Is PCR (polymerase chain reaction)? The polymerase chain reaction (PCR) is a test tube system for DNA replication which allows a “target” DNA sequence to be selectively amplified several million folds in just a few hours. The PCR achieves amplification of a predetermined fragment of DNA, (the target; which can, e.g., be from 100 to 1000 bp long) What Is the Conventional PCR Principle?The concept of DNA amplification by PCR is simple and its impact has been extraordinary. The chemistry involved in PCR depends on the complementarities (matching) of the nucleotide bases in the double-stranded DNA helix. When a molecule of DNA is sufficiently heated, the hydrogen bonds holding together the double helix are disrupted and the molecule separates or denatures into single strands. If the DNA solution is allowed to cool, the complementary base pairs can reform to restore the original double helix. What Is the Minimum Data Necessary Before a Typical PCR Reaction Can be Used? In order to use PCR, the exact sequence of nucleotides that flank (lay on either side of) the area of interest (the target area that needs to be amplified), must be known. This is the absolute minimum data necessary before a typical PCR reaction can be used. This data is necessary for the design of PCR primers that are 5-3 oligonucleotides of about 20 nucleotides in length. These are designed to be complementary to the flanking sequences of the target area, as mentioned previously. Thus, the researcher has to either use previous data (known information of sequences) or, if this is unavailable, determine the sequence of these regions experimentally. The two primers (primer pair) can then be synthesized chemically and will then serve as leaders or initiators of the replication step. The key to the replication reaction is that it is driven by a heat-stable polymerase molecule that reads a template DNA in the 3-5 direction and synthesises a new complementary template in the 5-3 direction, using free dideoxy nucleoside triphosphates (dNTP’s = nucleotide bases) as building blocks. What Are the Components of a Conventional PCR Setup?
How Does Conventional PCR Work?
PCR is a powerful technique that allows exponential amplification of DNA sequences. A PCR reaction needs a pair of primers that are complementary to the sequence of interest. Primers are extended by the DNA polymerase. The copies produced after the extension, so called amplicons, are re-amplified with the same primers, thus leading to an exponential amplification of the DNA molecules. After amplification, gel electrophoresis is used to analyse the amplified PCR products and this makes conventional PCR time consuming, since the reaction must finish before proceeding with the post-PCR analysis. Real Time PCR overcomes this problem, because of its ability to measure the PCR amplicons at early states of the reaction as they are accumulate in a “Real Time Detection” mode, thus measuring the amount of PCR product where the reaction is still in the exponential phase (QPCR). Try Conventional PCR in Praxilabs Virtual Labs
What Are the Three Basic Steps of Conventional PCR?PCR is based on three simple steps required for any DNA synthesis reaction: (1) Denaturation of the template into single strands. (2) Annealing of primers to each original strand for new strand synthesis. (3) Extension of the new DNA strands from the primers. These reactions may be carried out with any DNA polymerase and result in the synthesis of defined portions of the original DNA sequence. However, in order to achieve more than one round of synthesis, the templates must again be denatured, which requires temperatures well above those that inactivate most enzymes. Therefore, initial attempts at cyclic DNA synthesis were carried out by adding fresh polymerase after each denaturation step (1,2). The cost of such a protocol becomes rapidly prohibitive. Typically, PCR consists of a series of 20–40 repeated temperature changes, called cycles, with each cycle commonly consisting of 2–3 discrete temperature steps. The cycling is often preceded by a single temperature step at a high temperature (>90 °C) and followed by one hold at the end for final product extension or brief storage. The temperatures used and the length of time applied in each cycle depend on a variety of parameters. These include the enzyme used for DNA synthesis, the concentration of divalent ions and dNTPs in the reaction, and the melting temperature of the primers.
Flowchart of the three main steps of PCR Now we will know What happens at each stage of PCR Initialization step (only required for DNA polymerases that require heat activation by hot-start PCR): This step consists of heating the reaction to a temperature of 94–96 °C (or 98 °C if extremely thermostable polymerases are used), which is held for 1–9 minutes. Denaturation stepThis step is the first regular cycling event and consists of heating the reaction to 94–98 °C for 20–30 seconds. It causes DNA melting of the DNA template by disrupting the hydrogen bonds between complementary bases, yielding single-stranded DNA molecules. Annealing stepThe reaction temperature is lowered to 50–65 °C for 20–40 seconds allowing annealing of the primers to the single-stranded DNA template. Extension/elongation stepThe temperature at this step depends on the DNA polymerase used; Taq polymerase has its optimum activity temperature at 75–80 °C and commonly a temperature of 72 °C is used with this enzyme. At this step, the DNA polymerase synthesizes a new DNA strand complementary to the DNA template strand by adding dNTPs that are complementary to the template in 5′ to 3′ direction, condensing the 5′-phosphate group of the dNTPs with the 3′-hydroxyl group at the end of the nascent (extending) DNA strand. The extension time depends both on the DNA polymerase used and on the length of the DNA fragment to amplify. 3 steps of PCR and temperatures
PraxiLabs 3D virtual biology laboratory provides the PCR experiment, where you can conduct the experiment in the virtual biology lab, which provides science students and professors with a more accurate understanding of PCR meaning. Try 3D Virtual Labs Now
Applications of PCRBecause of the great sensitivity, PCR has found popularity in a wide range of applications:
PCR and Infectious DiseasesInfectious diseases can be caused by microbial pathogens, including agents of fungal, protozoan, bacterial, clamydial, rickettsia and viral nature. Despite many advances in diagnostics and vaccinology, infectious diseases still have devastating consequences for agricultural economies, worldwide. Three examples of devastation with regard to animal husbandry since the 1990s include the emergence of the prion, bovine spongiform encephalopathy (BSE); the huge outbreaks of foot-and-mouth disease (FMD) in Europe and avian influenza (AI) in Asia and elsewhere. A great many of these infectious diseases can be transmitted from vertebrate animals to man (called zoonoses) where more than 200 such zoonotic diseases are known. Infectious diseases are typically transmitted through the skin or eyes (direct contact, insect vectors, bite wounds, and sexual contact). In other cases agents are airborne and infect the epithelial cells lining the respiratory tract from where further systemic infection may proceed. Additional sources of infectious microorganisms are contaminated food and water with a route of infection through the mouth and alimentary tract, or through the respiratory system. Laboratory diagnostic technology is directed towards either the detection of the presence or absence of a pathogen and its subsequent identification and characterization The detection of the pathological effect of, or immunological response to, infection by a particular pathogen. PCR represents an entirely new technology. In vitro bacterial or viral culture is widely used to isolate and multiply pathogens, so that the organism itself, or its antigens, can be more readily detected, by being present in greater quantity and generally with fewer contaminants. PCR technology permits the same principle (i.e., in vitro amplification) to be applied to the detection of specific sequences of nucleic acid. There are enormous benefits to this approach. The application of PCR to disease diagnosis has been somewhat restricted to laboratories with the required facilities, equipment, funding, and expertise. The procedure must be made in very clean conditions since contamination with minute amounts of extraneous DNA may produce false positive results. Get Started Praxilabs For FREE!
PCR Analysis and COVID-19 Infection DetectionOne of the most important applications of PCR now is the detection of COVID-19 Infection. Recently, with the emergence of COVID-19 virus, we often hear the term “PCR analysis.” Which is the basic analysis currently used to detect Infected people with COVID-19. Through PCR analysis, scientists can detect the presence of viruses that cause infection, even when they are present in small quantities in the body. This method contributes to the diagnosis of transmissible viral diseases, as well as to the identification of mutations in various genetic disorders. For more information, write our article PCR Analysis: COVID-19 Infection Detection Method… PraxiLabs Initiative Experiments PraxiLabs Virtual Lab of Conventional PCR PraxiLabs provides simulation of conventional PCR test to make the students gain hands-on experience of the principle and practice on conventional polymerase chain reaction (PCR). PCR should ideally be performed in a dedicated ‘clean’ area which is free from other work involving DNA. Steps of the Experiment
243 ml of distilled water (40.5*6). 30 ml of the 10X PCR buffer containing MgCl2 (5*6). 6 ml of the 10 Mm dNTPs (1*6). 6 ml of the Forward primer (1*6). 6 ml of the Reverse primer (1*6). 3 ml of the Taq DNA polymerase (0.5*6).
Denaturation step: at 94 degrees Celsius for 30 seconds, 30 cycles. Annealing step: at 50-65 degrees Celsius for 30 seconds, 30 cycles. Elongation step: at 72 degrees Celsius for one minute, 30 cycles.
|
What are the 3 main steps of PCR?
Related Posts
Copyright © 2024 ShotOnMac Inc.
