Hint: In straightforward words, the velocity of an object right then and there of time. Instantaneous velocity definition is defined as "The velocity of an object under motion at a particular point of time." Complete step-by-step answer: Show
Note: It is resolved also as that of average velocity, yet here time period is limited. We realize that the average velocity for a given time stretch is absolute displacement isolated by complete time. As this time stretch methodologies zero, the displacement additionally moves toward zero. In any case, the constraint of the proportion of displacement to time is non zero and is called instantaneous velocity. We have now seen how to calculate the average velocity between two positions. However, since objects in the real world move continuously through space and time, we would like to find the velocity of an object at any single point. We can find the velocity of the object anywhere along its path by using some fundamental principles of calculus. This section gives us better insight into the physics of motion and will be useful in later chapters. Instantaneous VelocityThe quantity that tells us how fast an object is moving anywhere along its path is the instantaneous velocity, usually called simply velocity. It is the average velocity between two points on the path in the limit that the time (and therefore the displacement) between the two points approaches zero. To illustrate this idea mathematically, we need to express position x as a continuous function of t denoted by x(t). The expression for the average velocity between two points using this notation is [latex] \overset{\text{–}}{v}=\frac{x({t}_{2})-x({t}_{1})}{{t}_{2}-{t}_{1}} [/latex]. To find the instantaneous velocity at any position, we let [latex] {t}_{1}=t [/latex] and [latex] {t}_{2}=t+\text{Δ}t [/latex]. After inserting these expressions into the equation for the average velocity and taking the limit as [latex] \text{Δ}t\to 0 [/latex], we find the expression for the instantaneous velocity: [latex] v(t)=\underset{\text{Δ}t\to 0}{\text{lim}}\frac{x(t+\text{Δ}t)-x(t)}{\text{Δ}t}=\frac{dx(t)}{dt}. [/latex] Instantaneous Velocity The instantaneous velocity of an object is the limit of the average velocity as the elapsed time approaches zero, or the derivative of x with respect to t: [latex] v(t)=\frac{d}{dt}x(t). [/latex] Like average velocity, instantaneous velocity is a vector with dimension of length per time. The instantaneous velocity at a specific time point [latex] {t}_{0} [/latex] is the rate of change of the position function, which is the slope of the position function [latex] x(t) [/latex] at [latex] {t}_{0} [/latex]. (Figure) shows how the average velocity [latex] \overset{\text{–}}{v}=\frac{\text{Δ}x}{\text{Δ}t} [/latex] between two times approaches the instantaneous velocity at [latex] {t}_{0}. [/latex] The instantaneous velocity is shown at time [latex] {t}_{0} [/latex], which happens to be at the maximum of the position function. The slope of the position graph is zero at this point, and thus the instantaneous velocity is zero. At other times, [latex] {t}_{1},{t}_{2} [/latex], and so on, the instantaneous velocity is not zero because the slope of the position graph would be positive or negative. If the position function had a minimum, the slope of the position graph would also be zero, giving an instantaneous velocity of zero there as well. Thus, the zeros of the velocity function give the minimum and maximum of the position function. Figure 3.6 In a graph of position versus time, the instantaneous velocity is the slope of the tangent line at a given point. The average velocities [latex] \overset{\text{–}}{v}=\frac{\text{Δ}x}{\text{Δ}t}=\frac{{x}_{\text{f}}-{x}_{\text{i}}}{{t}_{\text{f}}-{t}_{\text{i}}} [/latex] between times [latex] \text{Δ}t={t}_{6}-{t}_{1},\text{Δ}t={t}_{5}-{t}_{2},\text{and}\,\text{Δ}t={t}_{4}-{t}_{3} [/latex] are shown. When [latex] \text{Δ}t\to 0 [/latex], the average velocity approaches the instantaneous velocity at [latex] t={t}_{0} [/latex]. ExampleFinding Velocity from a Position-Versus-Time GraphGiven the position-versus-time graph of (Figure), find the velocity-versus-time graph. Figure 3.7 The object starts out in the positive direction, stops for a short time, and then reverses direction, heading back toward the origin. Notice that the object comes to rest instantaneously, which would require an infinite force. Thus, the graph is an approximation of motion in the real world. (The concept of force is discussed in Newton’s Laws of Motion.) StrategyThe graph contains three straight lines during three time intervals. We find the velocity during each time interval by taking the slope of the line using the grid. SolutionShow Answer Time interval 0 s to 0.5 s: [latex] \overset{\text{–}}{v}=\frac{\text{Δ}x}{\text{Δ}t}=\frac{0.5\,\text{m}-0.0\,\text{m}}{0.5\,\text{s}-0.0\,\text{s}}=1.0\,\text{m/s} [/latex] Time interval 0.5 s to 1.0 s: [latex] \overset{\text{–}}{v}=\frac{\text{Δ}x}{\text{Δ}t}=\frac{0.0\,\text{m}-0.0\,\text{m}}{1.0\,\text{s}-0.5\,\text{s}}=0.0\,\text{m/s} [/latex] Time interval 1.0 s to 2.0 s: [latex] \overset{\text{–}}{v}=\frac{\text{Δ}x}{\text{Δ}t}=\frac{0.0\,\text{m}-0.5\,\text{m}}{2.0\,\text{s}-1.0\,\text{s}}=-0.5\,\text{m/s} [/latex] The graph of these values of velocity versus time is shown in (Figure). Figure 3.8 The velocity is positive for the first part of the trip, zero when the object is stopped, and negative when the object reverses direction. SignificanceDuring the time interval between 0 s and 0.5 s, the object’s position is moving away from the origin and the position-versus-time curve has a positive slope. At any point along the curve during this time interval, we can find the instantaneous velocity by taking its slope, which is +1 m/s, as shown in (Figure). In the subsequent time interval, between 0.5 s and 1.0 s, the position doesn’t change and we see the slope is zero. From 1.0 s to 2.0 s, the object is moving back toward the origin and the slope is −0.5 m/s. The object has reversed direction and has a negative velocity. SpeedIn everyday language, most people use the terms speed and velocity interchangeably. In physics, however, they do not have the same meaning and are distinct concepts. One major difference is that speed has no direction; that is, speed is a scalar. We can calculate the average speed by finding the total distance traveled divided by the elapsed time: [latex] \text{Average speed}=\overset{\text{–}}{s}=\frac{\text{Total distance}}{\text{Elapsed time}}. [/latex] Average speed is not necessarily the same as the magnitude of the average velocity, which is found by dividing the magnitude of the total displacement by the elapsed time. For example, if a trip starts and ends at the same location, the total displacement is zero, and therefore the average velocity is zero. The average speed, however, is not zero, because the total distance traveled is greater than zero. If we take a road trip of 300 km and need to be at our destination at a certain time, then we would be interested in our average speed. However, we can calculate the instantaneous speed from the magnitude of the instantaneous velocity: [latex] \text{Instantaneous speed}=|v(t)|. [/latex] If a particle is moving along the x-axis at +7.0 m/s and another particle is moving along the same axis at −7.0 m/s, they have different velocities, but both have the same speed of 7.0 m/s. Some typical speeds are shown in the following table. Speeds of Various Objects*Escape velocity is the velocity at which an object must be launched so that it overcomes Earth’s gravity and is not pulled back toward Earth.Speedm/smi/hContinental drift[latex] {10}^{-7} [/latex][latex] 2\,×\,{10}^{-7} [/latex]Brisk walk1.73.9Cyclist4.410Sprint runner12.227Rural speed limit24.656Official land speed record341.1763Speed of sound at sea level343768Space shuttle on reentry780017,500Escape velocity of Earth*11,20025,000Orbital speed of Earth around the Sun29,78366,623Speed of light in a vacuum299,792,458670,616,629Calculating Instantaneous VelocityWhen calculating instantaneous velocity, we need to specify the explicit form of the position function x(t). For the moment, let’s use polynomials [latex] x(t)=A{t}^{n} [/latex], because they are easily differentiated using the power rule of calculus: [latex] \frac{dx(t)}{dt}=nA{t}^{n-1}. [/latex] The following example illustrates the use of (Figure). ExampleInstantaneous Velocity Versus Average VelocityThe position of a particle is given by [latex] x(t)=3.0t+0.5{t}^{3}\,\text{m} [/latex].
Strategy(Figure) gives the instantaneous velocity of the particle as the derivative of the position function. Looking at the form of the position function given, we see that it is a polynomial in t. Therefore, we can use (Figure), the power rule from calculus, to find the solution. We use (Figure) to calculate the average velocity of the particle. Solution
SignificanceIn the limit that the time interval used to calculate [latex] \overset{\text{−}}{v} [/latex] goes to zero, the value obtained for [latex] \overset{\text{−}}{v} [/latex] converges to the value of v. ExampleInstantaneous Velocity Versus SpeedConsider the motion of a particle in which the position is [latex] x(t)=3.0t-3{t}^{2}\,\text{m} [/latex].
StrategyThe instantaneous velocity is the derivative of the position function and the speed is the magnitude of the instantaneous velocity. We use (Figure) and (Figure) to solve for instantaneous velocity. Solution
SignificanceThe velocity of the particle gives us direction information, indicating the particle is moving to the left (west) or right (east). The speed gives the magnitude of the velocity. By graphing the position, velocity, and speed as functions of time, we can understand these concepts visually (Figure). In (a), the graph shows the particle moving in the positive direction until t = 0.5 s, when it reverses direction. The reversal of direction can also be seen in (b) at 0.5 s where the velocity is zero and then turns negative. At 1.0 s it is back at the origin where it started. The particle’s velocity at 1.0 s in (b) is negative, because it is traveling in the negative direction. But in (c), however, its speed is positive and remains positive throughout the travel time. We can also interpret velocity as the slope of the position-versus-time graph. The slope of x(t) is decreasing toward zero, becoming zero at 0.5 s and increasingly negative thereafter. This analysis of comparing the graphs of position, velocity, and speed helps catch errors in calculations. The graphs must be consistent with each other and help interpret the calculations. Figure 3.9 (a) Position: x(t) versus time. (b) Velocity: v(t) versus time. The slope of the position graph is the velocity. A rough comparison of the slopes of the tangent lines in (a) at 0.25 s, 0.5 s, and 1.0 s with the values for velocity at the corresponding times indicates they are the same values. (c) Speed: [latex] |v(t)| [/latex] versus time. Speed is always a positive number. Check Your UnderstandingThe position of an object as a function of time is [latex] x(t)=-3{t}^{2}\,\text{m} [/latex]. (a) What is the velocity of the object as a function of time? (b) Is the velocity ever positive? (c) What are the velocity and speed at t = 1.0 s? Show Solution (a) Taking the derivative of x(t) gives v(t) = −6t m/s. (b) No, because time can never be negative. (c) The velocity is v(1.0 s) = −6 m/s and the speed is [latex] |v(1.0\,\text{s})|=6\,\text{m/s} [/latex]. Summary
Conceptual QuestionsThere is a distinction between average speed and the magnitude of average velocity. Give an example that illustrates the difference between these two quantities. Show Solution Average speed is the total distance traveled divided by the elapsed time. If you go for a walk, leaving and returning to your home, your average speed is a positive number. Since Average velocity = Displacement/Elapsed time, your average velocity is zero. Does the speedometer of a car measure speed or velocity? If you divide the total distance traveled on a car trip (as determined by the odometer) by the elapsed time of the trip, are you calculating average speed or magnitude of average velocity? Under what circumstances are these two quantities the same? Show Solution Average speed. They are the same if the car doesn’t reverse direction. How are instantaneous velocity and instantaneous speed related to one another? How do they differ? ProblemsA woodchuck runs 20 m to the right in 5 s, then turns and runs 10 m to the left in 3 s. (a) What is the average velocity of the woodchuck? (b) What is its average speed? Sketch the velocity-versus-time graph from the following position-versus-time graph. Show Answer Sketch the velocity-versus-time graph from the following position-versus-time graph. Given the following velocity-versus-time graph, sketch the position-versus-time graph. Show Answer An object has a position function x(t) = 5t m. (a) What is the velocity as a function of time? (b) Graph the position function and the velocity function. A particle moves along the x-axis according to [latex] x(t)=10t-2{t}^{2}\,\text{m} [/latex]. (a) What is the instantaneous velocity at t = 2 s and t = 3 s? (b) What is the instantaneous speed at these times? (c) What is the average velocity between t = 2 s and t = 3 s? Show Answer a. [latex] v(t)=(10-4t)\text{m/s} [/latex]; v(2 s) = 2 m/s, v(3 s) = −2 m/s; b. [latex] |v(2\,\text{s})|=2\,\text{m/s},|v(3\,\text{s})|=2\,\text{m/s} [/latex]; (c) [latex] \overset{\text{–}}{v}=0\,\text{m/s} [/latex] Unreasonable results. A particle moves along the x-axis according to [latex] x(t)=3{t}^{3}+5t\text{} [/latex]. At what time is the velocity of the particle equal to zero? Is this reasonable? Under what condition average and instantaneous velocity are equal?Hence, the average velocity is equal to its instantaneous velocity when the body is moving with a uniform velocity.
Is the average and instantaneous velocities are equal for an object moving with constant velocity along a straight line and define acceleration?When a particle moves with constant velocity, its average velocity, it instantaneous velocity and its speed are all equal.
Under what condition is the average velocity equal to?Therefore, the magnitude of average velocity of an object is equal to its average speed when the displacement of the object is equal to the distance covered by it in a given time interval. This happens when an object moves along a straight line in the same direction (without turning back).
|