Disclosure: We may get commissions for purchases made through links in this post. Ask anyone how much a Jeep Wrangler weighs (or any car for that matter), and they probably wouldn’t know. While this is perfectly forgivable, not knowing your vehicle’s weight may be more detrimental than you realize. This article will not only get to answer this question but also help you use this knowledge – when
it matters. How much does a Jeep Wrangler weigh? Depending on the year, trim, door count, and engine specifications, a Jeep Wrangler’s curb weight can be anywhere between 2,855 lbs (1,295 Kg) and 5,222 lbs (2,369 Kg). These values are based on stock measurements but may still increase after modifications. Revisit what makes up curb weight, which components cause it to change, and when it becomes handy. Continue reading this ultimate guide – It will be worth your
while! Vehicle weight can mean many things, but the most
common connotations are GVWR, dry weight/mass, or curb weight. The maximum total weight of a vehicle is GVWR (Gross Vehicle Weight Rating). It includes rider/passengers, accessories, and allowable load. Dry weight is the reverse – signifying an empty transport with no people, fluids, or cargo. I initially planned to share both dry and curb weights of
Jeep Wrangler models. But since most of their manuals do not specify dry weight, we will be using curb weight instead. By definition, curb weight is the weight of your Jeep Wrangler, including accompanying standard equipment. It is somehow similar to dry weight, except that it includes a full fuel tank and all other fluids (oil, water, and coolant) but sans passengers, goods/cargo, or any other unnecessary items. You can say it is the unladen weight of your four-wheeler when not in use or resting on an even, flat surface or curb (called “kerb” in the UK) – hence, the namesake. Because Jeep Wrangler models vary in trim, standard equipment, wheelbase, and overall dimensions, there is no specific curb weight that covers all of them. If we were to determine how heavy all Wranglers are on average, they would weigh between 2,855 lbs (1,295 Kg) and 5,222 lbs (2,369 Kg). The lightest of the trims is, of course, the 1987 Jeep Wrangler YJ SE at 2,855 lbs. Conversely, the heaviest of the lot is the 2021 Jeep Wrangler JL Rubicon 4xe, weighing 5,222 lbs, followed by the 2012 Jeep Wrangler JK Unlimited Brute (double-cab pickup by AEV Conversion) at 5,200 pounds (2,359 Kg). To fully answer “How much does a Jeep Wrangler weigh?” here is a table that consolidates all Wrangler generations and their corresponding weights: Jeep Wrangler Curb Weight (Based on Year – Trim)
1st generation Wranglers weigh between 2,855 lbs (1,295 Kg) and 3,371 lbs (1,529 Kg), while 2nd generation ones fall between 3,045 lbs (1,381 Kg) and 3,832 lbs (1,686 Kg). For the 3rd generation Wranglers, the 4×4 with the smallest curb weight is the 2007 base model (and any other special-edition trim based on it). On the other hand, the vehicle with the biggest weight is the 2012 Unlimited Brute, weighing 5,200 lbs (2,359 Kg).
4th generation Wranglers have the heaviest trims throughout the vehicle’s lifetime, with the 4xe hybrids topping the list. The highly-acclaimed Rubicon 392 may come second to these versions but is still pretty heavy at 5,103 lbs.
The above details are from Jeep Wrangler manuals and other reputable sources. Note that these figures are true for stock specifications. If you happen to own a secondhand Wrangler or have already modified it, then expect slight deviations from the values listed. Things to Look IntoBefore you get too overwhelmed with all these numbers, let us go over the different aspects (mechanical or otherwise) that form part of a vehicle weight’s equation – for you to better understand variances in curb weight for Jeep Wrangler models: FluidsThis first item is pretty self-explanatory, but let us expound on it further with an example. Between a 2-door and a 4-door model, there is a 3-gallon difference in fuel tank capacity. This translates to an added weight of 25 pounds or 11.3 kilograms. TiresRecent-year Wrangler models usually do not get set up with tires larger than 33 inches, as rubber adds to the vehicle’s curb and gross weights. Here are some examples of present-day trims and their respective wheel-and-tire measurements:
Knowing this fact is not only crucial to getting the right-size tires for replacement but also a convenient way to determining if your 4×4’s knobbies have been upgraded (in case it is pre-loved). Additionally, stock tire sizes serve as a guide should you mount monster-truck wheels on your wheeler. Essentially, you need to keep track of any weight increases. Hard vs. Soft TopsSince the Jeep Wrangler series became commercialized in 1987, consumers had the liberty to opt for either a more durable hardcover or an easy-to-remove softcover. Although not by a huge margin, the choice of top material affects the overall weight of a given Jeep Wrangler trim. The table below shows you the resulting weight differences for some 1st and 2nd-generation Wranglers:
The above are examples of weight differences for Jeep Wranglers with hard or soft tops and are not exhaustive. Generally, there is a 100 to 200-lb difference in overall vehicle weight among various trims. The added weight also depends on whether the Wrangler is 2- or 4-door. The latter has a longer wheelbase and, therefore, a longer roof area to be covered. Engine & Transmission TypeAnother mechanical component that affects the Wrangler’s weight is the kind of engine and transmission it is equipped with. So far, the four-wheeler has had 33 different engines (including current ones). Here is a table that shows changes in curb weight specific to the vehicle’s power mill and transmission: Jeep Wrangler Curb Weight (Based on Engine – Transmission Type)
The details above include the weight of the transfer case that goes with the given transmission. If you’re not particular about the exact trim your Jeep Wrangler has but know the year and kind of engine in it, this information will prove beneficial. All in all, the engine type only causes a 90 to 150-lb difference in the 4×4’s overall weight – provided that your engine is stock. Where Curb Weight Comes into PlayNow that you better understand what comprises or affects your 4×4’s weight, it would definitely be worth knowing where this information is deemed important (or when it can save you trouble). Even if you are predominantly an off-roader, you can never be too prepared for state laws and weight limitations on some roads and bridges. The last thing anyone would want to deal with is unnecessary fines or offense citations. Driving LicenseIn some non-U.S. regions/countries, securing a car driving license is partly dependent on a private vehicle’s GVWR or GVM (Gross Vehicle Mass) – both of which are affected by the car’s curb weight. Inversely, drivers who already have a license are limited to driving vehicles with weight limits strictly within the license class. Having no idea about your car’s curb weight may result in unforeseen violations or the need to acquire a higher-tier driving license to be able to drive a Moab or an Unlimited Rubicon. Fuel SavesWranglers have fuel-efficient diesel and gasoline-fed engines, but it would not hurt to stay within weight limits and keep your fuel expenses in check. Keeping within your Wrangler’s curb weight improves your four-wheeler’s fuel economy by 1-2%. Doing the opposite suffocates the car and results in increased gasoline/diesel consumption. Performance UpgradesYes – you read that right! Tools you need to use to effectively carry out mods (and even routine checks) depend on your car’s weight. Similarly, parts you want to equip your Jeep Wrangler with have to be sturdy enough to handle its curb weight. Fitting your 4×4 with aftermarket shocks or axles is one good example of when knowing your vehicle’s curb weight becomes significant. State LawsMonitoring of Gross Vehicle Weight Rating (GVWR) varies from state to state and is strictly implemented on newly-purchased cars. As such, knowing how much a Jeep Wrangler weighs will save you the pains of buying a four-wheeler that you will end up not being able to use. Conclusion – How Much Does a Jeep Wrangler Weigh?Knowing how much a Jeep Wrangler weighs serves as a baseline for GVM limits, performance mods, and even choice of trim and accessories. Depending on the specific make and model you have, your Jeep can weigh anywhere from 2,855 lbs to 5,222 lbs (1,295 – 2,369 Kg). Since we already know how important this piece of information is, let us make sure we are no longer clueless the next time someone requires it. How much does my Jeep Wrangler weigh?Jeep Wrangler 2-Door:
Jeep Wrangler Islander 4×4: 3,948 pounds. Jeep Wrangler Willys 4×4: 3,948 pounds. Jeep Wrangler Sahara 4×4: 3,948 pounds. Jeep Wrangler Freedom 4×4: 3,948 pounds.
How much does an older Jeep Wrangler weigh?1st generation Wranglers weigh between 2,855 lbs (1,295 Kg) and 3,371 lbs (1,529 Kg), while 2nd generation ones fall between 3,045 lbs (1,381 Kg) and 3,832 lbs (1,686 Kg).
How much does a Jeep Wrangler YJ weigh?Jeep Wrangler (YJ). Are Jeep Wranglers heavy?Jeep Wrangler Weight by Configuration
Jeep Wrangler Sport: 3,970 pounds. Jeep Wrangler Unlimited Sport: 4,201 pounds. Jeep Wrangler Unlimited Sport S: 4,201 pounds.
|